update(applications):重新打开usb外设相关驱动,恢复usb打印信息

.config

@@ -75,7 +75,9 @@ CONFIG_RT_USING_DEVICE=y
 # CONFIG_RT_USING_INTERRUPT_INFO is not set
 # CONFIG_RT_USING_THREADSAFE_PRINTF is not set
 # CONFIG_RT_USING_SCHED_THREAD_CTX is not set
-# CONFIG_RT_USING_CONSOLE is not set
+CONFIG_RT_USING_CONSOLE=y
+CONFIG_RT_CONSOLEBUF_SIZE=128
+CONFIG_RT_CONSOLE_DEVICE_NAME="vcom"
 CONFIG_RT_VER_NUM=0x50100
 # CONFIG_RT_USING_STDC_ATOMIC is not set
 CONFIG_RT_BACKTRACE_LEVEL_MAX_NR=32
@@ -95,6 +97,7 @@ CONFIG_RT_USING_USER_MAIN=y
 CONFIG_RT_MAIN_THREAD_STACK_SIZE=1536
 CONFIG_RT_MAIN_THREAD_PRIORITY=10
 # CONFIG_RT_USING_LEGACY is not set
+# CONFIG_RT_USING_MSH is not set
 
 #
 # DFS: device virtual file system
@@ -152,7 +155,7 @@ CONFIG_RT_USING_PIN=y
 CONFIG_RT_USING_USB=y
 # CONFIG_RT_USING_USB_HOST is not set
 CONFIG_RT_USING_USB_DEVICE=y
-CONFIG_RT_USBD_THREAD_STACK_SZ=4096
+CONFIG_RT_USBD_THREAD_STACK_SZ=2048
 CONFIG_USB_VENDOR_ID=0x0FFE
 CONFIG_USB_PRODUCT_ID=0x0001
 # CONFIG_RT_USB_DEVICE_COMPOSITE is not set
@@ -1278,7 +1281,7 @@ CONFIG_SOC_SERIES_STM32F1=y
 # On-chip Peripheral Drivers
 #
 CONFIG_BSP_USING_GPIO=y
-# CONFIG_BSP_USING_USBD is not set
+CONFIG_BSP_USING_USBD=y
 CONFIG_BSP_USING_UART=y
 CONFIG_BSP_USING_UART1=y
 # CONFIG_BSP_UART1_RX_USING_DMA is not set

applications/VK_Client.c

@@ -137,7 +137,7 @@ int16_t client_tcp_connect(Cclient_t *client) {
   client->error_cnt = 0;
   lte_dev.reset_flag = DTU_CF_NO_NEED_RESET;
 
-  // rt_kprintf("%s\r", lte_dev.at_buf);
+  rt_kprintf("%s\r", lte_dev.at_buf);
 
 #ifdef TRANSPARENT_MODE
 // Set_Tansparent_Mode(client);
@@ -186,7 +186,7 @@ int16_t client_yield(CLte_dev_t *pLte_dev) {
     if (pLte_dev->client1->connect_sta == true) {
       rt_err_t ret = rt_sem_take(pLte_dev->com_dev_rx_sem, 1000);
       if (rt_tick_get() - last_rx_tick > RT_TICK_PER_SECOND * 10) {
-        //rt_kprintf("timeout!!! reconnect.\n");
+        rt_kprintf("timeout!!! reconnect.\n");
         hw_printf("timeout!!! reconnect.\n");
         pLte_dev->client1->connect_sta = false;
       }
@@ -208,7 +208,7 @@ int16_t client_yield(CLte_dev_t *pLte_dev) {
               }
               break;
             } else if (strstr((const char *)lte_dev.at_buf, "NO CARRIER")) {
-              //rt_kprintf("disconnect!!!\n");
+              rt_kprintf("disconnect!!!\n");
               hw_printf("disconnect!!!\n");
               pLte_dev->client1->connect_sta = false;
               break;

applications/drv_ec800k.c

@@ -74,7 +74,7 @@ int16_t BSP_LTE_CipSend(uint8_t *pdata, uint32_t length, uint32_t waittime) {
 
 int16_t BSP_LTE_SendCmd(const char *cmd, const char *expect, const char *error,
                         uint32_t waittime) {
-  //rt_kprintf("%s\n", cmd);
+  rt_kprintf("%s\n", cmd);
   hw_printf("%s\n", cmd);
   BSP_LTE_SendData((uint8_t *)cmd, rt_strlen(cmd));
 
@@ -86,7 +86,7 @@ int16_t BSP_LTE_SendCmd(const char *cmd, const char *expect, const char *error,
 
     rt_device_read(lte_dev.com_dev, 0, lte_dev.at_buf, sizeof(lte_dev.at_buf));
 
-    //rt_kprintf("%s\n", lte_dev.at_buf);
+    rt_kprintf("%s\n", lte_dev.at_buf);
     hw_printf("%s\n", lte_dev.at_buf);
     /* 清空缓存 */
     uint8_t c;
@@ -179,7 +179,7 @@ int16_t BSP_LTE_GetCGATT(int16_t retry) {
     }
     retry--;
   } while (retry);
-  //rt_kprintf("PS detached:[%s]", lte_dev.at_buf);
+  rt_kprintf("PS detached:[%s]", lte_dev.at_buf);
   return -1;
 }
 
@@ -293,13 +293,13 @@ void BSP_LTE_Config(void) {
 
   while (0 != BSP_LTE_SendATE(3)) {
     rt_thread_mdelay(500);
-    //rt_kprintf("BSP_LTE_SendATE error\n");
+    rt_kprintf("BSP_LTE_SendATE error\n");
     hw_printf("BSP_LTE_SendATE error\n");
   }
 
   /*查询模块信息*/
   BSP_LTE_SendCmd(AT_ATI, DEFAULT_EXPECT, DEFAULT_ERROR, LTE_CMD_WAIT_NORMAL);
-  //rt_kprintf("%s", lte_dev.at_buf);
+  rt_kprintf("%s", lte_dev.at_buf);
   hw_printf("%s", lte_dev.at_buf);
   /*查询SIM卡是否存在*/
   res = BSP_LTE_SendATCPIN(3);

applications/main.c

@@ -28,9 +28,9 @@ static void task_com_entry(void *arg) { com_task(); }
 
 int main(void) {
 
-  //rt_device_t vcom = rt_device_find("vcom");
-  //rt_device_open(vcom, RT_DEVICE_FLAG_RDWR);
-  //rt_console_set_device("vcom");
+  rt_device_t vcom = rt_device_find("vcom");
+  rt_device_open(vcom, RT_DEVICE_FLAG_RDWR);
+  rt_console_set_device("vcom");
 
   u3 = rt_device_find("uart3");
   rt_device_open(u3, RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_INT_TX |

rtconfig.h

@@ -44,6 +44,9 @@
 #define RT_USING_HEAP
 /* end of Memory Management */
 #define RT_USING_DEVICE
+#define RT_USING_CONSOLE
+#define RT_CONSOLEBUF_SIZE 128
+#define RT_CONSOLE_DEVICE_NAME "vcom"
 #define RT_VER_NUM 0x50100
 #define RT_BACKTRACE_LEVEL_MAX_NR 32
 /* end of RT-Thread Kernel */
@@ -77,7 +80,7 @@
 
 #define RT_USING_USB
 #define RT_USING_USB_DEVICE
-#define RT_USBD_THREAD_STACK_SZ 4096
+#define RT_USBD_THREAD_STACK_SZ 2048
 #define USB_VENDOR_ID 0x0FFE
 #define USB_PRODUCT_ID 0x0001
 #define _RT_USB_DEVICE_CDC
@@ -336,6 +339,7 @@
 /* On-chip Peripheral Drivers */
 
 #define BSP_USING_GPIO
+#define BSP_USING_USBD
 #define BSP_USING_UART
 #define BSP_USING_UART1
 #define BSP_USING_UART2