You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1.4 KiB
1.4 KiB
Hardware Hardware Selection & Setup
This section contains information the components that might be used in a drone, and how they are set up.
- Flight Controllers (Autopilots) - Pixhawk and other FCs, firmware updates, other bootloaders
- Sensors — accelerometer, gyroscope, compass, airspeed, barometer, rangefinders, GNSS, RTK GNSS, Optical Flow, Tachometers, Factory calibration, thermal calibration.
- Actuators — Allocation, ESC, motors, servos
- Radio Control (RC) — Manual control using an RC system
- Joysticks — Manual control using a Joystick connected to QGroundControl
- Data Links — MAVLink, telemetry radios, satellite comms
- Power Systems — Battery estimation tuning, power modules, smart batteries
- Peripherals — camera, gimbal, grippers, parachute, RemoteID, traffic avoidance etc.
- I2C Peripherals
- CAN Peripherals
- DroneCAN Peripherals
- Cable Wiring
- Companion Computers — Setup, peripherals, computer vision, etc.
- Serial Port Configuration
- PX4 Ethernet Setup