You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
288 lines
8.4 KiB
288 lines
8.4 KiB
/* USER CODE BEGIN Header */
|
|
/**
|
|
******************************************************************************
|
|
* File Name : stm32f1xx_hal_msp.c
|
|
* Description : This file provides code for the MSP Initialization
|
|
* and de-Initialization codes.
|
|
******************************************************************************
|
|
** This notice applies to any and all portions of this file
|
|
* that are not between comment pairs USER CODE BEGIN and
|
|
* USER CODE END. Other portions of this file, whether
|
|
* inserted by the user or by software development tools
|
|
* are owned by their respective copyright owners.
|
|
*
|
|
* COPYRIGHT(c) 2018 STMicroelectronics
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
/* USER CODE END Header */
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "main.h"
|
|
/* USER CODE BEGIN Includes */
|
|
#include <drv_common.h>
|
|
/* USER CODE END Includes */
|
|
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* USER CODE BEGIN TD */
|
|
|
|
/* USER CODE END TD */
|
|
|
|
/* Private define ------------------------------------------------------------*/
|
|
/* USER CODE BEGIN Define */
|
|
|
|
/* USER CODE END Define */
|
|
|
|
/* Private macro -------------------------------------------------------------*/
|
|
/* USER CODE BEGIN Macro */
|
|
|
|
/* USER CODE END Macro */
|
|
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/* USER CODE BEGIN PV */
|
|
|
|
/* USER CODE END PV */
|
|
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
/* USER CODE BEGIN PFP */
|
|
|
|
/* USER CODE END PFP */
|
|
|
|
/* External functions --------------------------------------------------------*/
|
|
/* USER CODE BEGIN ExternalFunctions */
|
|
|
|
/* USER CODE END ExternalFunctions */
|
|
|
|
/* USER CODE BEGIN 0 */
|
|
|
|
/* USER CODE END 0 */
|
|
/**
|
|
* Initializes the Global MSP.
|
|
*/
|
|
void HAL_MspInit(void)
|
|
{
|
|
|
|
/* USER CODE BEGIN MspInit 0 */
|
|
|
|
/* USER CODE END MspInit 0 */
|
|
|
|
__HAL_RCC_AFIO_CLK_ENABLE();
|
|
__HAL_RCC_PWR_CLK_ENABLE();
|
|
|
|
/* System interrupt init*/
|
|
|
|
/** NOJTAG: JTAG-DP Disabled and SW-DP Enabled
|
|
*/
|
|
__HAL_AFIO_REMAP_SWJ_NOJTAG();
|
|
|
|
/* USER CODE BEGIN MspInit 1 */
|
|
|
|
/* USER CODE END MspInit 1 */
|
|
}
|
|
|
|
/**
|
|
* @brief UART MSP Initialization
|
|
* This function configures the hardware resources used in this example
|
|
* @param huart: UART handle pointer
|
|
* @retval None
|
|
*/
|
|
void HAL_UART_MspInit(UART_HandleTypeDef* huart)
|
|
{
|
|
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
|
if(huart->Instance==USART2)
|
|
{
|
|
/* USER CODE BEGIN USART2_MspInit 0 */
|
|
|
|
/* USER CODE END USART2_MspInit 0 */
|
|
/* Peripheral clock enable */
|
|
__HAL_RCC_USART2_CLK_ENABLE();
|
|
|
|
__HAL_RCC_GPIOA_CLK_ENABLE();
|
|
/**USART2 GPIO Configuration
|
|
PA0-WKUP ------> USART2_CTS
|
|
PA1 ------> USART2_RTS
|
|
PA2 ------> USART2_TX
|
|
PA3 ------> USART2_RX
|
|
*/
|
|
GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_3;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
|
|
GPIO_InitStruct.Pin = GPIO_PIN_1|GPIO_PIN_2;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
|
|
/* USART2 interrupt Init */
|
|
HAL_NVIC_SetPriority(USART2_IRQn, 1, 0);
|
|
HAL_NVIC_EnableIRQ(USART2_IRQn);
|
|
/* USER CODE BEGIN USART2_MspInit 1 */
|
|
|
|
/* USER CODE END USART2_MspInit 1 */
|
|
}
|
|
else if(huart->Instance==USART3)
|
|
{
|
|
/* USER CODE BEGIN USART3_MspInit 0 */
|
|
|
|
/* USER CODE END USART3_MspInit 0 */
|
|
/* Peripheral clock enable */
|
|
__HAL_RCC_USART3_CLK_ENABLE();
|
|
|
|
__HAL_RCC_GPIOB_CLK_ENABLE();
|
|
/**USART3 GPIO Configuration
|
|
PB10 ------> USART3_TX
|
|
PB11 ------> USART3_RX
|
|
*/
|
|
GPIO_InitStruct.Pin = GPIO_PIN_10;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
|
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
|
|
|
GPIO_InitStruct.Pin = GPIO_PIN_11;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
|
|
|
/* USART3 interrupt Init */
|
|
HAL_NVIC_SetPriority(USART3_IRQn, 1, 0);
|
|
HAL_NVIC_EnableIRQ(USART3_IRQn);
|
|
/* USER CODE BEGIN USART3_MspInit 1 */
|
|
|
|
/* USER CODE END USART3_MspInit 1 */
|
|
}
|
|
|
|
}
|
|
|
|
/**
|
|
* @brief UART MSP De-Initialization
|
|
* This function freeze the hardware resources used in this example
|
|
* @param huart: UART handle pointer
|
|
* @retval None
|
|
*/
|
|
void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
|
|
{
|
|
if(huart->Instance==USART2)
|
|
{
|
|
/* USER CODE BEGIN USART2_MspDeInit 0 */
|
|
|
|
/* USER CODE END USART2_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_USART2_CLK_DISABLE();
|
|
|
|
/**USART2 GPIO Configuration
|
|
PA0-WKUP ------> USART2_CTS
|
|
PA1 ------> USART2_RTS
|
|
PA2 ------> USART2_TX
|
|
PA3 ------> USART2_RX
|
|
*/
|
|
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3);
|
|
|
|
/* USART2 interrupt DeInit */
|
|
HAL_NVIC_DisableIRQ(USART2_IRQn);
|
|
/* USER CODE BEGIN USART2_MspDeInit 1 */
|
|
|
|
/* USER CODE END USART2_MspDeInit 1 */
|
|
}
|
|
else if(huart->Instance==USART3)
|
|
{
|
|
/* USER CODE BEGIN USART3_MspDeInit 0 */
|
|
|
|
/* USER CODE END USART3_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_USART3_CLK_DISABLE();
|
|
|
|
/**USART3 GPIO Configuration
|
|
PB10 ------> USART3_TX
|
|
PB11 ------> USART3_RX
|
|
*/
|
|
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_10|GPIO_PIN_11);
|
|
|
|
/* USART3 interrupt DeInit */
|
|
HAL_NVIC_DisableIRQ(USART3_IRQn);
|
|
/* USER CODE BEGIN USART3_MspDeInit 1 */
|
|
|
|
/* USER CODE END USART3_MspDeInit 1 */
|
|
}
|
|
|
|
}
|
|
|
|
/**
|
|
* @brief PCD MSP Initialization
|
|
* This function configures the hardware resources used in this example
|
|
* @param hpcd: PCD handle pointer
|
|
* @retval None
|
|
*/
|
|
void HAL_PCD_MspInit(PCD_HandleTypeDef* hpcd)
|
|
{
|
|
if(hpcd->Instance==USB)
|
|
{
|
|
/* USER CODE BEGIN USB_MspInit 0 */
|
|
|
|
/* USER CODE END USB_MspInit 0 */
|
|
/* Peripheral clock enable */
|
|
__HAL_RCC_USB_CLK_ENABLE();
|
|
/* USB interrupt Init */
|
|
HAL_NVIC_SetPriority(USB_HP_CAN1_TX_IRQn, 0, 0);
|
|
HAL_NVIC_EnableIRQ(USB_HP_CAN1_TX_IRQn);
|
|
HAL_NVIC_SetPriority(USB_LP_CAN1_RX0_IRQn, 0, 0);
|
|
HAL_NVIC_EnableIRQ(USB_LP_CAN1_RX0_IRQn);
|
|
/* USER CODE BEGIN USB_MspInit 1 */
|
|
|
|
/* USER CODE END USB_MspInit 1 */
|
|
|
|
}
|
|
|
|
}
|
|
|
|
/**
|
|
* @brief PCD MSP De-Initialization
|
|
* This function freeze the hardware resources used in this example
|
|
* @param hpcd: PCD handle pointer
|
|
* @retval None
|
|
*/
|
|
void HAL_PCD_MspDeInit(PCD_HandleTypeDef* hpcd)
|
|
{
|
|
if(hpcd->Instance==USB)
|
|
{
|
|
/* USER CODE BEGIN USB_MspDeInit 0 */
|
|
|
|
/* USER CODE END USB_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_USB_CLK_DISABLE();
|
|
|
|
/* USB interrupt DeInit */
|
|
HAL_NVIC_DisableIRQ(USB_HP_CAN1_TX_IRQn);
|
|
HAL_NVIC_DisableIRQ(USB_LP_CAN1_RX0_IRQn);
|
|
/* USER CODE BEGIN USB_MspDeInit 1 */
|
|
|
|
/* USER CODE END USB_MspDeInit 1 */
|
|
}
|
|
|
|
}
|
|
|
|
/* USER CODE BEGIN 1 */
|
|
|
|
/* USER CODE END 1 */
|
|
|