You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
222 lines
7.9 KiB
222 lines
7.9 KiB
/****************************************************************************
|
|
*
|
|
* Copyright (c) 2021 PX4 Development Team. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name PX4 nor the names of its contributors may be
|
|
* used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
****************************************************************************/
|
|
|
|
/**
|
|
* @file board_config.h
|
|
*
|
|
* Board internal definitions
|
|
*/
|
|
|
|
#pragma once
|
|
|
|
/****************************************************************************************************
|
|
* Included Files
|
|
****************************************************************************************************/
|
|
|
|
#include <px4_platform_common/px4_config.h>
|
|
#include <nuttx/compiler.h>
|
|
#include <stdint.h>
|
|
|
|
#include <stm32_gpio.h>
|
|
|
|
/****************************************************************************************************
|
|
* Definitions
|
|
****************************************************************************************************/
|
|
|
|
#define FLASH_BASED_PARAMS
|
|
|
|
|
|
/* LEDs are driven with push open drain to support Anode to 5V or 3.3V */
|
|
|
|
# define GPIO_nLED_RED /* PD15 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTD|GPIO_PIN15)
|
|
# define GPIO_nLED_GREEN /* PD11 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTD|GPIO_PIN11)
|
|
# define GPIO_nLED_BLUE /* PB15 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN15)
|
|
|
|
# define BOARD_HAS_CONTROL_STATUS_LEDS 1
|
|
# define BOARD_OVERLOAD_LED LED_RED
|
|
# define BOARD_ARMED_STATE_LED LED_BLUE
|
|
|
|
/*
|
|
* ADC channels
|
|
*
|
|
* These are the channel numbers of the ADCs of the microcontroller that
|
|
* can be used by the Px4 Firmware in the adc driver
|
|
*/
|
|
|
|
/* ADC defines to be used in sensors.cpp to read from a particular channel */
|
|
|
|
#define SYSTEM_ADC_BASE STM32_ADC1_BASE
|
|
|
|
#define ADC12_CH(n) (n)
|
|
|
|
#define PX4_ADC_GPIO \
|
|
/* PC4 */ GPIO_ADC12_INP4, \
|
|
/* PC5 */ GPIO_ADC12_INP8
|
|
|
|
/* Define GPIO pins used as ADC N.B. Channel numbers must match below */
|
|
/* Define Channel numbers must match above GPIO pin IN(n)*/
|
|
#define ADC_BATTERY_VOLTAGE_CHANNEL ADC12_CH(4)
|
|
#define ADC_BATTERY_CURRENT_CHANNEL ADC12_CH(8)
|
|
|
|
#define ADC_CHANNELS \
|
|
((1 << ADC_BATTERY_VOLTAGE_CHANNEL) | \
|
|
(1 << ADC_BATTERY_CURRENT_CHANNEL))
|
|
|
|
#define BOARD_ADC_OPEN_CIRCUIT_V (1.6f)
|
|
|
|
|
|
|
|
/* Define Battery 1 Voltage Divider and A per V
|
|
*/
|
|
|
|
// #define BOARD_BATTERY1_V_DIV (11.0f) /* measured with the provided PM board */
|
|
// #define BOARD_BATTERY1_A_PER_V (40.0f)
|
|
// #define BOARD_BATTERY2_V_DIV (11.0f) /* measured with the provided PM board */
|
|
|
|
/* PWM
|
|
*/
|
|
#define DIRECT_PWM_OUTPUT_CHANNELS 8
|
|
|
|
#define BOARD_HAS_PWM DIRECT_PWM_OUTPUT_CHANNELS
|
|
|
|
|
|
/* Spare GPIO */
|
|
#define GPIO_PA4 /* PA4 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTA|GPIO_PIN4)
|
|
#define GPIO_PC0 /* PC0 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTC|GPIO_PIN0)
|
|
#define GPIO_PC1 /* PC1 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTC|GPIO_PIN1)
|
|
/* Tone alarm output */
|
|
|
|
#define TONE_ALARM_TIMER 4 /* Timer 4 */
|
|
#define TONE_ALARM_CHANNEL 3 /* PD14 GPIO_TIM4_CH3 NC */
|
|
/*NC can be modified with Spare GPIO then connected with hardware */
|
|
#define GPIO_BUZZER_1 /* PA4 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN4)
|
|
|
|
#define GPIO_TONE_ALARM_IDLE GPIO_BUZZER_1
|
|
#define GPIO_TONE_ALARM GPIO_BUZZER_1
|
|
|
|
/* USB OTG FS
|
|
*
|
|
* PE15 OTG_FS_VBUS VBUS sensing
|
|
*/
|
|
#define GPIO_OTGFS_VBUS /* PE15 */ (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_100MHz|GPIO_PORTE|GPIO_PIN15)
|
|
#define BOARD_ADC_USB_CONNECTED (px4_arch_gpioread(GPIO_OTGFS_VBUS))
|
|
|
|
/* High-resolution timer */
|
|
#define HRT_TIMER 8 /* use timer1 for the HRT */
|
|
#define HRT_TIMER_CHANNEL 1 /* use capture/compare channel 1 */
|
|
|
|
/* RC Serial port */
|
|
#define RC_SERIAL_PORT "/dev/ttyS4"
|
|
#define BOARD_SUPPORTS_RC_SERIAL_PORT_OUTPUT
|
|
|
|
// #define GPIO_SBUS_INV (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN14)
|
|
// #define RC_INVERT_INPUT(_invert_true) px4_arch_gpiowrite(GPIO_SBUS_INV, _invert_true);
|
|
|
|
/* SD card bringup does not work if performed on the IDLE thread because it
|
|
* will cause waiting. Use either:
|
|
*
|
|
* CONFIG_LIB_BOARDCTL=y, OR
|
|
* CONFIG_BOARD_INITIALIZE=y && CONFIG_BOARD_INITTHREAD=y
|
|
*/
|
|
#define SDIO_SLOTNO 0 /* Only one slot */
|
|
#define SDIO_MINOR 0
|
|
#if defined(CONFIG_BOARD_INITIALIZE) && !defined(CONFIG_LIB_BOARDCTL) && \
|
|
!defined(CONFIG_BOARD_INITTHREAD)
|
|
# warning SDIO initialization cannot be perfomed on the IDLE thread
|
|
#endif
|
|
|
|
/* This board provides a DMA pool and APIs */
|
|
#define BOARD_DMA_ALLOC_POOL_SIZE 5120
|
|
|
|
/* This board provides the board_on_reset interface */
|
|
#define BOARD_HAS_ON_RESET 1
|
|
|
|
#define PX4_GPIO_INIT_LIST { \
|
|
GPIO_CAN1_TX,\
|
|
GPIO_CAN1_RX, \
|
|
PX4_ADC_GPIO, \
|
|
GPIO_TONE_ALARM_IDLE, \
|
|
GPIO_PC0, \
|
|
GPIO_PC1, \
|
|
}
|
|
|
|
#define BOARD_ENABLE_CONSOLE_BUFFER
|
|
|
|
#define BOARD_NUM_IO_TIMERS 5
|
|
|
|
|
|
__BEGIN_DECLS
|
|
|
|
/****************************************************************************************************
|
|
* Public Types
|
|
****************************************************************************************************/
|
|
|
|
/****************************************************************************************************
|
|
* Public data
|
|
****************************************************************************************************/
|
|
|
|
#ifndef __ASSEMBLY__
|
|
|
|
/****************************************************************************************************
|
|
* Public Functions
|
|
****************************************************************************************************/
|
|
|
|
/****************************************************************************
|
|
* Name: stm32_sdio_initialize
|
|
*
|
|
* Description:
|
|
* Initialize SDIO-based MMC/SD card support
|
|
*
|
|
****************************************************************************/
|
|
|
|
int stm32_sdio_initialize(void);
|
|
|
|
/****************************************************************************************************
|
|
* Name: stm32_spiinitialize
|
|
*
|
|
* Description:
|
|
* Called to configure SPI chip select GPIO pins for the board.
|
|
*
|
|
****************************************************************************************************/
|
|
|
|
extern void stm32_spiinitialize(void);
|
|
|
|
extern void stm32_usbinitialize(void);
|
|
|
|
extern void board_peripheral_reset(int ms);
|
|
|
|
#include <px4_platform_common/board_common.h>
|
|
|
|
#endif /* __ASSEMBLY__ */
|
|
|
|
__END_DECLS
|
|
|