You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
6.0 KiB
6.0 KiB
CUAV NEO 3 Pro
NEO 3Pro is a DroneCan GPS receiver produced by CUAV. It integrates UBLOX M9N, STM32F4 MCU, RM3100 compass, three-color LED light and safety switch.
기술 사양
| 하드웨어 | 형식 |
|---|---|
| 프로세서 | STM32F412 |
| 나침반 | RM3100 |
| 기압계 | MS5611 |
| GNSS receiver | UBLOX NEO M9N |
| RGB drive | NCP5623C |
| 부저 | Passive buzzer |
| 안전 스위치 | Physical button |
| GNSS | Beidou, Galileo, GLONASS, GPS |
| GNSS Augmentation System | SBAS:WAAS,EGNOS,MSAS QZSS:L1s(SAIF) other：RTCM3.3 |
| Number of concurrent GNSS | 4 |
| Frequency band | GPS:L1C/A GLONASS:L10F Beidou:B1I Galileo:E1B/C |
| Horizontal accuracy | 2.0M |
| Speed accuracy | 0.05M/S |
| Nav. update rate | 25Hz(Max) |
| Acquisition | Cold start：24S Hot start：2S Aided start:2s |
| Number of satellites(MAX) | 32+ |
| Sensitivity | Tracking and nav-167dBm Cold start Hot star-148dBm Reacquisition -160dBm |
| Protocol | UAVCAN |
| Port TYpe | GHR-04V-S |
| Supported flight controller | CUAV series, Pixahwk series |
| Wave filtering | SAW+LNA+SAW |
| Anti-Electromagnetic/radio frequency interference | EMI+RFI |
| Upgrade firmware | support |
| Input voltage | 5V |
| Operating temperature | -10~70℃ |
| Size | 60_60_16MM |
| 중량 | 33g |
구매처
배선
NEO 3 Pro connected to autopilot CAN1/CAN2 interface
PX4 설정
Open QGroundControl > Parameters and modify the following parameters:
UAVCAN_ENABLESet toSensors Automatic config.UAVCAN_SUB_GPSSet toEnable.
