You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
158 lines
5.9 KiB
158 lines
5.9 KiB
/****************************************************************************
|
|
*
|
|
* Copyright (c) 2019 PX4 Development Team. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name PX4 nor the names of its contributors may be
|
|
* used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
****************************************************************************/
|
|
|
|
/**
|
|
* @file board_config.h
|
|
*
|
|
* Board internal definitions
|
|
*/
|
|
|
|
#pragma once
|
|
|
|
#include <px4_platform_common/px4_config.h>
|
|
#include <nuttx/compiler.h>
|
|
#include <stdint.h>
|
|
#include <stm32_gpio.h>
|
|
|
|
/* PX4IO connection configuration */
|
|
#define BOARD_USES_PX4IO_VERSION 2
|
|
#define PX4IO_SERIAL_DEVICE "/dev/ttyS4"
|
|
#define PX4IO_SERIAL_TX_GPIO GPIO_USART6_TX
|
|
#define PX4IO_SERIAL_RX_GPIO GPIO_USART6_RX
|
|
#define PX4IO_SERIAL_BASE STM32_USART6_BASE
|
|
#define PX4IO_SERIAL_VECTOR STM32_IRQ_USART6
|
|
#define PX4IO_SERIAL_TX_DMAMAP DMAMAP_USART6_TX
|
|
#define PX4IO_SERIAL_RX_DMAMAP DMAMAP_USART6_RX
|
|
#define PX4IO_SERIAL_RCC_REG STM32_RCC_APB2ENR
|
|
#define PX4IO_SERIAL_RCC_EN RCC_APB2ENR_USART6EN
|
|
#define PX4IO_SERIAL_CLOCK STM32_PCLK2_FREQUENCY
|
|
#define PX4IO_SERIAL_BITRATE 1500000 /* 1.5Mbps -> max rate for IO */
|
|
|
|
/* LEDs */
|
|
|
|
#define GPIO_LED1 (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN12)
|
|
#define BOARD_OVERLOAD_LED LED_RED
|
|
|
|
/*
|
|
* ADC channels
|
|
*
|
|
* These are the channel numbers of the ADCs of the microcontroller that can be used by the Px4 Firmware in the adc driver
|
|
*/
|
|
#define ADC_CHANNELS (1 << 2) | (1 << 3) | (1 << 4) | (1 << 13) | (1 << 14) | (1 << 15)
|
|
|
|
// ADC defines to be used in sensors.cpp to read from a particular channel
|
|
#define ADC_BATTERY_VOLTAGE_CHANNEL 2
|
|
#define ADC_BATTERY_CURRENT_CHANNEL 3
|
|
#define ADC_5V_RAIL_SENSE 4
|
|
#define ADC_AIRSPEED_VOLTAGE_CHANNEL 15
|
|
|
|
/* Power supply control and monitoring GPIOs */
|
|
// Signal is not connected
|
|
#define GPIO_nVDD_5V_PERIPH_EN (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN8)
|
|
#define GPIO_VDD_BRICK_VALID (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTB|GPIO_PIN5)
|
|
#define GPIO_VDD_3V3_SENSORS_EN (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN3)
|
|
#define GPIO_VDD_5V_PERIPH_OC (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN15)
|
|
|
|
/* Tone alarm output */
|
|
#define TONE_ALARM_TIMER 2 /* timer 2 */
|
|
#define TONE_ALARM_CHANNEL 1 /* channel 1 */
|
|
#define GPIO_TONE_ALARM_IDLE (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN15)
|
|
#define GPIO_TONE_ALARM (GPIO_ALT|GPIO_AF1|GPIO_SPEED_2MHz|GPIO_PUSHPULL|GPIO_PORTA|GPIO_PIN15)
|
|
|
|
/* PWM */
|
|
#define DIRECT_PWM_OUTPUT_CHANNELS 6
|
|
|
|
/* USB OTG FS
|
|
*
|
|
* PA9 OTG_FS_VBUS VBUS sensing (also connected to the green LED)
|
|
*/
|
|
#define GPIO_OTGFS_VBUS (GPIO_INPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|GPIO_OPENDRAIN|GPIO_PORTA|GPIO_PIN9)
|
|
|
|
/* High-resolution timer */
|
|
#define HRT_TIMER 8 /* use timer8 for the HRT */
|
|
#define HRT_TIMER_CHANNEL 3 /* use capture/compare channel 3 */
|
|
|
|
/* PWM input driver. Use FMU AUX5 pins attached to timer4 channel 2 */
|
|
#define PWMIN_TIMER 4
|
|
#define PWMIN_TIMER_CHANNEL 2
|
|
#define GPIO_PWM_IN GPIO_TIM4_CH2IN_2
|
|
|
|
/* By Providing BOARD_ADC_USB_CONNECTED this board support the ADC
|
|
* system_power interface, and therefore provides the true logic
|
|
* GPIO BOARD_ADC_xxxx macros.
|
|
*/
|
|
#define BOARD_ADC_USB_CONNECTED (px4_arch_gpioread(GPIO_OTGFS_VBUS))
|
|
#define BOARD_ADC_BRICK_VALID (!px4_arch_gpioread(GPIO_VDD_BRICK_VALID))
|
|
#define BOARD_ADC_SERVO_VALID (1)
|
|
#define BOARD_ADC_PERIPH_5V_OC (!px4_arch_gpioread(GPIO_VDD_5V_PERIPH_OC))
|
|
#define BOARD_ADC_HIPOWER_5V_OC (0)
|
|
|
|
|
|
/* This board provides a DMA pool and APIs */
|
|
#define BOARD_DMA_ALLOC_POOL_SIZE 5120
|
|
|
|
/* This board provides the board_on_reset interface */
|
|
#define BOARD_HAS_ON_RESET 1
|
|
|
|
#define BOARD_HAS_STATIC_MANIFEST 1
|
|
|
|
#define SDIO_SLOTNO 0 /* Only one slot */
|
|
#define SDIO_MINOR 0
|
|
|
|
#define BOARD_ENABLE_CONSOLE_BUFFER
|
|
|
|
#define BOARD_NUM_IO_TIMERS 3
|
|
|
|
__BEGIN_DECLS
|
|
#ifndef __ASSEMBLY__
|
|
|
|
|
|
/****************************************************************************
|
|
* Name: stm32_sdio_initialize
|
|
*
|
|
* Description:
|
|
* Initialize SDIO-based MMC/SD card support
|
|
*
|
|
****************************************************************************/
|
|
|
|
int stm32_sdio_initialize(void);
|
|
|
|
extern void stm32_spiinitialize(void);
|
|
|
|
extern void stm32_usbinitialize(void);
|
|
|
|
extern void board_peripheral_reset(int ms);
|
|
|
|
#include <px4_platform_common/board_common.h>
|
|
#endif /* __ASSEMBLY__ */
|
|
__END_DECLS
|
|
|