# CUAV C-RTK The [CUAV C-RTK GPS receiver](https://www.cuav.net/en/c_rtk_9ps/) is an [RTK GPS module](../gps_compass/rtk_gps.md) for the mass market. 一个完整的RTK 系统由至少两个 c-rtk 模块 组成(一个用于基站, 另外一个作为移动站用于飞机上)。 使用RTK,PX4控制器可以获取到它的位置,并且这个位置的精度可以达到厘米级的精度,这比普通GPS提供的位置更加精确。 ## 购买渠道 - [cuav taobao](https://item.taobao.com/item.htm?id=565380634341&spm=2014.21600712.0.0) - [cuav aliexpress](https://www.aliexpress.com/store/product/CUAV-NEW-Flight-Controller-GPS-C-RTK-differential-positioning-navigation-module-GPS-for-PIX4-Pixhawk-pixhack/3257035_32853894248.html?spm=2114.12010608.0.0.75592fadQKPPEn) ## 配置 RTK setup and use on PX4 via _QGroundControl_ is largely plug and play \(see [RTK GPS](../gps_compass/rtk_gps.md) for more information\). ## 接线和连接 C-RTK GPS comes with a cable that terminates in a 6-pin connector and 4-pin connector that are compatible with [Pixhack v3](https://doc.cuav.net/flight-controller/pixhack/en/quick-start-pixhack-v3x.html#gps--compass). 6针连接器提供 rtk gps 的接口, 并应连接到飞行控制器的 gps 接口。 4针连接器是一个 m8n (标准) gps 接口, 可作为第二个 gps(可选)。 :::tip At time of writing PX4 does not yet fully support a second GPS. The 4-pin port need not be connected. ::: The cables/connectors may need to be modified in order to connect to other flight controller boards. The pin mappings for _Pixhawk 3 Pro_ and _Pixracer_ are shown below. ### 针脚定义 The C-RTK GPS pinout is provided below. This can be used to help modify the connector for other autopilot boards. | 引脚 | C-RTK GPS 6P | 引脚 | Pixhawk 3 Pro GPS | C-RTK GPS 4P | | -- | --------------------------- | -- | --------------------------- | --------------------------- | | 1 | SDA | 1 | VCC | | | 2 | SCL | 2 | GPS_TX | | | 3 | GPS_RX | 3 | GPS_RX | GPS_RX | | 4 | GPS_TX | 4 | SCL | GPS_TX | | 5 | VCC_5V | 5 | SDA | VCC_5v | | 6 | GND | 6 | GND | GND |