{%- set m = 0.050 -%}
{%- set l = 0.005 -%}
{%- set w = 0.030 -%}
{%- set h = 0.010 -%}
{%- set ixx = m/12*(w**2 + h**2) -%}
{%- set iyy = m/12*(l**2 + h**2) -%}
{%- set izz = m/12*(l**2 + w**2) -%}

{%- macro box(l, w, h) -%}
<geometry>
  <box>
    <size>{{l}} {{w}} {{h}}</size>
  </box>
</geometry>
{%- endmacro -%}

<?xml version="1.0" ?>
<sdf version="1.5">

  <model name="c920">

    <link name="link">

      <inertial>
        <mass>{{m}}</mass>
        <inertia>
          <ixx>{{ixx}}</ixx>
          <iyy>{{iyy}}</iyy>
          <izz>{{izz}}</izz>
        </inertia>
      </inertial>

      <visual name="visual">
        {{ box(l, w, h)|indent(8) }}
      </visual>

      <collision name="collision">
        {{ box(l, w, h)|indent(8) }}
      </collision>

      <sensor type="camera" name="c920_sensor">
        <always_on>true</always_on>
        <update_rate>30.0</update_rate>
        <camera name="head">
          <horizontal_fov>1.229</horizontal_fov>
          <image>
            <width>1920</width>
            <height>1080</height>
            <format>R8G8B8</format>
          </image>
          <clip>
            <near>0.02</near>
            <far>10</far>
          </clip>
          <lens>
            <type>gnomonical</type>
            <scale_to_hfov>1</scale_to_hfov>
          </lens>
          <noise>
            <type>gaussian</type>
            <!-- Noise is sampled independently per pixel on each frame.
                 That pixel's noise value is added to each of its color
                 channels, which at that point lie in the range [0,1]. -->
            <mean>0.0</mean>
            <stddev>0.007</stddev>
          </noise>
        </camera>
        <plugin name="camera_controller" filename="libgazebo_ros_camera.so">
          <robotNamespace></robotNamespace>
          <cameraName>c920</cameraName>
          <imageTopicName>image_raw</imageTopicName>
          <cameraInfoTopicName>camera_info</cameraInfoTopicName>
          <frameName>camera_link</frameName>
          <hackBaseline>0.07</hackBaseline>
          <distortionK1>0.0</distortionK1>
          <distortionK2>0.0</distortionK2>
          <distortionK3>0.0</distortionK3>
          <distortionT1>0.0</distortionT1>
          <distortionT2>0.0</distortionT2>
        </plugin>
      </sensor>
    </link>
  </model>

</sdf>


<!-- vim: set et ft=xml fenc=utf-8 ff=unix sts=0 sw=2 ts=2 : -->