/****************************************************************************
 *
 *   Copyright (C) 2021 PX4 Development Team. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name PX4 nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ****************************************************************************/

#pragma once

/****************************************************************************
 * 10-8--2016:
 *  To simplify the ripple effect on the tools, we will be using
 *  /dev/serial/by-id/<asterisk>PX4<asterisk> to locate PX4 devices. Therefore
 *  moving forward all Bootloaders must contain the prefix "PX4 BL "
 *  in the USBDEVICESTRING
 *  This Change will be made in an upcoming BL release
 ****************************************************************************/
/*
 * Define usage to configure a bootloader
 *
 *
 * Constant                example          Usage
 * APP_LOAD_ADDRESS     0x08004000            - The address in Linker Script, where the app fw is org-ed
 * BOOTLOADER_DELAY     5000                  - Ms to wait while under USB pwr or bootloader request
 * BOARD_FMUV2
 * INTERFACE_USB        1                     - (Optional) Scan and use the USB interface for bootloading
 * INTERFACE_USART      1                     - (Optional) Scan and use the Serial interface for bootloading
 * USBDEVICESTRING      "PX4 BL FMU v2.x"     - USB id string
 * USBPRODUCTID         0x0011                - PID Should match defconfig
 * BOOT_DELAY_ADDRESS   0x000001a0            - (Optional) From the linker script from Linker Script to get a custom
 *                                               delay provided by an APP FW
 * BOARD_TYPE           9                     - Must match .prototype boad_id
 * _FLASH_KBYTES        (*(uint16_t *)0x1fff7a22) - Run time flash size detection
 * BOARD_FLASH_SECTORS  ((_FLASH_KBYTES == 0x400) ? 11 : 23) - Run time determine the physical last sector
 * BOARD_FLASH_SECTORS   11                   - Hard coded zero based last sector
 * BOARD_FLASH_SIZE     (_FLASH_KBYTES*1024)-   Total Flash size of device, determined at run time.
 *                         (1024 * 1024)      - Hard coded Total Flash of device - The bootloader and app reserved will be deducted
 *                                              programmatically
 *
 * BOARD_FIRST_FLASH_SECTOR_TO_ERASE  2        - Optional sectors index in the flash_sectors table  (F4 only), to begin erasing.
 *                                               This is to allow sectors to be reserved for app fw usage. That will NOT be erased
 *                                               during a FW upgrade.
 *                                               The default is 0, and selects the first sector to be erased, as the 0th entry in the
 *                                               flash_sectors table. Which is the second physical sector of FLASH in the device.
 *                                               The first physical sector of FLASH is used by the bootloader, and is not defined
 *                                               in the table.
 *
 * APP_RESERVATION_SIZE (BOARD_FIRST_FLASH_SECTOR_TO_ERASE * 16 * 1024) - Number of bytes reserved by the APP FW. This number plus
 *                                                                        BOOTLOADER_RESERVATION_SIZE  will be deducted from
 *                                                                        BOARD_FLASH_SIZE to determine the size of the App FW
 *                                                                        and hence the address space of FLASH to erase and program.
 * USBMFGSTRING            "PX4 AP"            - Optional USB MFG string (default is '3D Robotics' if not defined.)
 * SERIAL_BREAK_DETECT_DISABLED                -  Optional prevent break selection on Serial port from entering or staying in BL
 *
 * * Other defines are somewhat self explanatory.
 */

/* Boot device selection list*/
#define USB0_DEV       0x01
#define SERIAL0_DEV    0x02
#define SERIAL1_DEV    0x04

#define APP_LOAD_ADDRESS               0x08020000
#define BOOTLOADER_DELAY               5000
#define INTERFACE_USB                  1
#define INTERFACE_USB_CONFIG           "/dev/ttyACM0"
#define BOARD_VBUS                     MK_GPIO_INPUT(GPIO_OTGFS_VBUS)

//#define USE_VBUS_PULL_DOWN
#define INTERFACE_USART                1
#define INTERFACE_USART_CONFIG         "/dev/ttyS0,115200"
#define BOOT_DELAY_ADDRESS             0x000001a0
#define BOARD_TYPE                     1188
#define BOARD_FLASH_SECTORS            (14)
#define BOARD_FLASH_SIZE               (16 * 128 * 1024)
#define APP_RESERVATION_SIZE 	       (1 * 128 * 1024)

#define OSC_FREQ                       8

#define BOARD_PIN_LED_ACTIVITY         GPIO_nLED_BLUE // BLUE
#define BOARD_PIN_LED_BOOTLOADER       GPIO_nLED_GREEN // GREEN
#define BOARD_LED_ON                   0
#define BOARD_LED_OFF                  1

#define SERIAL_BREAK_DETECT_DISABLED   1

#if !defined(ARCH_SN_MAX_LENGTH)
# define ARCH_SN_MAX_LENGTH 12
#endif

#if !defined(APP_RESERVATION_SIZE)
#  define APP_RESERVATION_SIZE 0
#endif

#if !defined(BOARD_FIRST_FLASH_SECTOR_TO_ERASE)
#  define BOARD_FIRST_FLASH_SECTOR_TO_ERASE 1
#endif

#if !defined(USB_DATA_ALIGN)
# define USB_DATA_ALIGN
#endif

#ifndef BOOT_DEVICES_SELECTION
#  define BOOT_DEVICES_SELECTION USB0_DEV|SERIAL0_DEV|SERIAL1_DEV
#endif

#ifndef BOOT_DEVICES_FILTER_ONUSB
#  define BOOT_DEVICES_FILTER_ONUSB USB0_DEV|SERIAL0_DEV|SERIAL1_DEV
#endif